1800m Wireline Core Drill Rig – All-Hydraulic Surface Rig for Solid Minerals
Designed exclusively for solid mineral exploration, the 1800m wireline core drill rig combines full hydraulic control with optimized geometry for HQ/NQ/PQ diamond coring. Its 194kW Cummins B6.7 engine delivers 5,500Nm torque, enabling efficient penetration to 1800m in B-size rods—even in abrasive quartz veins.
Why It Excels in Mineral Exploration
l Wireline Efficiency: Full compatibility with B, N, H, P rods; inner tube retrieval in <90 seconds
l Mobility: Compact transport length (6.55m) fits standard shipping containers
l Durability: Wind-cooled 28MPa hydraulic system operates continuously at 50°C ambient
l Operator Comfort: Ergonomic control panel with real-time pressure and RPM monitoring
This wireline core drilling rig is the preferred choice for lithium and copper explorers due to its consistent core quality (>95% recovery). As an all-hydraulic surface drill rig, it eliminates mechanical clutches, reducing maintenance costs by 25%.
For detailed planning, download the CSD1800AX specifications PDF—including weight distribution, fuel consumption, and foundation requirements. It’s the definitive core rig for solid mineral exploration in Tier-1 and Tier-2 mining jurisdictions.
Main Technical Specifications – CSD1800AX core drill rig
|
Category |
Parameter |
Value |
|
Drilling Capacity (Reference) |
Rod Size B (55.5 mm) |
2,000 m |
|
|
Rod Size N (71 mm) |
1,700 m |
|
|
Rod Size H (89 mm) |
1,200 m |
|
|
Rod Size P (114 mm) |
700 m |
|
Hydraulic System |
Rated Pressure |
28 MPa |
|
|
Cooling Method |
Air-cooled |
|
Engine |
Model |
Cummins B6.7CS4 260C |
|
|
Type |
Turbocharged |
|
|
Rated Power |
194 kW |
|
|
Rated Speed |
2,200 rpm |
|
Top Drive (Power Head) |
Maximum Torque |
5,500 N·m |
|
|
Maximum Speed |
1,050 rpm |
|
|
Feed Stroke |
3,500 mm |
|
|
Through-Hole Diameter |
117 mm |
|
|
Hoisting Force / Feed Force |
189 kN / 50 kN |
|
Main Winch |
Hoisting Force |
135 kN |
|
|
Hoisting Speed |
33 m/min (low), 49 m/min (high) |
|
|
Wire Rope Diameter |
22 mm |
|
|
Rope Capacity |
41 m |
|
Wireline Coring Winch |
Hoisting Force (empty drum) |
11 kN |
|
|
Hoisting Speed |
120 m/min |
|
|
Wire Rope Diameter |
6.6 mm |
|
|
Rope Capacity |
1,500 m |
|
Mast |
Total Height |
13 m |
|
|
Drilling Angle Range |
45° – 90° |
|
|
Sliding Stroke |
1.1 m |
|
Rod Clamp at Hole Mouth |
Compatible Rod Sizes |
B, N, H, P |
|
Travel Performance |
Maximum Gradeability |
30° |
|
|
Maximum Travel Speed |
2 km/h |
|
Transport Dimensions |
Length × Width × Height |
6,550 × 2,320 × 2,720 mm |
|
Machine Weight |
Total Weight |
14 t |